There are a number of things to consider when looking to buy or replace doors for your home. Do you need interior or exterior doors? Will they be PVC, Composite or Wood? Are fire doors what you need? And perhaps one of the most important question is how do I measure my doors?
It goes without saying that you must measure each and every door you are looking to replace - do not assume they are all the same size. We regularly have customers asking us to take back doors that have been supplied correctly but have been wrongly measured, the cost of doing so is prohibitive as most suppliers expect a restocking charge and the transportation of doors is expensive. Here are some useful hints and tips:
- How to measure for an interior door
- Measuring for an exterior wooden door
- Measuring for an exterior Pvc or Composite door
- Unusual size doors
- When do I need to fit fire doors?
Try and think what you really want - cheap and cheerful or something more sturdy? Do you want doors for painting, varnishing or staining, there is little point in buying Oak doors if you really want something for painting.
Most interior doors are 35mm thick and it may be that the existing doors in your home are 40mm, the 35mm doors will fit perfectly but will show a tiny margin at the inside face, always fit the doors to the door stop, the stop is the timber that the door actually "hits" against when closed, all 30 minute rated fire doors are 45mm thick unless they are what is known as 1 hour rated, these will be 55mm thick.
Always allow 4-7 days for the delivery of new doors, sometimes longer for some doors such as bespoke, external doors or internal doors cannot just have a stamp stuck on and put in the post, DirectDoors.com carefully wrap the doors and in most instances we actually crate them.
The DirectDoors.com site is based on compatibility and will try and guide you to buy the product that is best suited for your door, eg; the correct hinges, the correct latch or lock for a particular type of handle and so on.
Whatever you want we have it!
Any questions, email firstname.lastname@example.org and ask "Chippy"