Room Divider - Handmade Eco-Urban® Orkney with Two Sides DD6403C - Clear Glass - Premium Primed - Colour & Size Options

A router will be required for door installation.

THRUEASI ROOM DIVIDERS

Product Advice:

• The frame making this kit for Self-Assembly is MDF Premium Primed - all options are without any decoration but all MDF sections are pre-drilled ready for making the frame up with ease, the side screen door panel will require to be cut on the bottom edge to suit the frame height and make sure a tight fit is achieved. These are a bespoke product, made for you upon receipt of your order and cannot be cancelled.

Choose wisely.

• Side Screens: : Any side screens / insets are heavy duty 8mm clear toughened glass. See the "Safety Glass" PDF for more details.
• Decoration: Where a product is marked as pre-finished it is to the door only.
• Oak veneer option: MDF frames will be a contrast rather than an exact wooden veneer match with the door.
• Frames: MDF frames will be supplied Premium Primed.
• Frame breadth: This is the breadth of the frame from one side of the room to eg; a hallway - 108mm or 133mm.
• Dimensions: We offer several Frame/Side widths, we give the side frame inset size and the door size, the latter with 4mm clearance in height and width, we then show the overall outside WIDTH of the frame from left to right - the TIGHT size, you must allow clearance to fit within your wall space.
• Door position: Double doors are central with side inset screens on the right and on the left.
  
• Pairmaker: If you require a pairmaker at an extra cost for where the double doors meet in the middle we will adjust the frame overall width by 10mm.
• Fixings: No wall fixings are included - see our "Installation PDF"
• Remember: The doors are not hinged and the view we are showing is for the doors to open away or towards when you hinge them, the side inset requires to be cut to height when you have assembled the frame.
• Fittings: Handles and hinges are not included or pre-machined but lots of options to choose from our massive range of styles and finishes.
  
• Sizes: Other sizes (using 762 doors) are available on request, please refer to the table below, to order please contact us at info@directdoors.com

DOORS:

The doors are premium primed and need to be finished on site - please refer to the "Door Finish" PDF in the PDFs section.

Urban Slimline Industrial Door Range: our own UK manufactured range of high-quality hand made interior doors to replace the Weekamp range we have now removed.

All doors from DirectDoors Bespoke Slimline range are 40mm thick, rail & stile breadths are 90mm, astragals are 34x40mm. All dimensions and thicknesses are +/- 2mm.

Please note, the 90mm rails require no more than a 65mm latch to be fitted, do not drill any more than 70mm from the edge of the door.

All edges and cut-outs should be treated before final fitting, failure to treat bare timber may lead to excessive changes in moisture content which will cause timber to shrink or swell, possibly causing splits or distortion.

The beauty of the grain may be visible on some of the real wood door material.

The doors will have visible wood grain and are primed but need to be fully finished on site.