Urban Ultimate® Room Divider Bronx 4 Pane Door Pair DD6315C with Matching Side - Clear Glass - Colour & Height Options

A router will be required for door installation.

High-quality British-made Industrial style room dividers made from thick engineered sustainable solid laminated timber with the warmth that only a real wood-grained texture door can offer, better than a cold steel feel.

URBAN ULTIMATE ROOM DIVIDERS

Product Advice:

• The frame making this kit for Self-Assembly is MDF Premium Primed - all options are without any decoration but all MDF sections are pre-drilled ready for making the frame up with ease, the side door panel will be slightly smaller than the doors. These are a bespoke product, made for you upon receipt of your order and cannot be cancelled.

Choose wisely.

• Decoration: Doors, Side Screens and Frames will be supplied Premium Primed and will require final coating before fitting.
• Frames: MDF frames will be supplied Premium Primed.
• Frame breadth: This is the breadth of the frame from one side of the room to eg; a hallway - 108mm or 133mm.
• Width: We offer two Frame/Side widths, we give the side frame inset size and the door size, the latter with 4mm clearance in height and width, we then show the overall outside WIDTH of the frame from left to right - the TIGHT size, you must allow clearance to fit within your wall space.
• Height: The height is customizable, the HEIGHT you provide is the overall height of the room divider (including the frame and any clearances).
• Door position: Double doors are central with side inset screens on the right and on the left.
  
• Pairmaker: If you've chosen a double door with one or two side insets, please contact us If you require a pairmaker, this is available at an extra cost for where the double doors meet in the middle we will adjust the frame overall width by 10mm.
• Fixings: No wall fixings are included - see our "Installation PDF".
• Remember: The doors are not hinged and the view we are showing is for the doors to open away or towards when you hinge them.
• Fittings: Handles and hinges are not included or pre-machined but lots of options to choose from our massive range of styles and finishes.

DOORS:

The doors and sides are premium primed and need to be finished on site - please refer to the "Door Finish" PDF in the PDFs section.

Urban Slimline Industrial Door Range: our own UK-manufactured range of high-quality hand made interior doors.

All doors from DirectDoors Bespoke Slimline range are 40-45mm thick, rail & stile breadths are 90mm(the bottom rail of any sides will be smaller to keep the glass in alignment), astragals are 34x40mm. All dimensions and thicknesses are +/- 2mm.

Please note, the 90mm rails require no more than a 65mm latch to be fitted, do not drill any more than 70mm from the edge of the door.

All edges and cut-outs should be treated before final fitting, failure to treat bare timber may lead to excessive changes in moisture content which will cause timber to shrink or swell, possibly causing splits or distortion.

The beauty of the grain may be visible on some of the real wood door material.

The doors are primed and need to be finished on site.