Internal Room Dividers
We supply and deliver most of our room divider doors within 48-72 hours anywhere in the UK.
Add a stylish touch of flexibility to your home with a sleek room divider door system. And with contemporary white, prefinished, unfinished, and oak options, to name but a few, you’re bound to find something to fit.
At Direct Doors, we know doors - and room dividers - and on this page we’ll help you choose the ideal system to suit your budget. All of our room dividers include the frames, which are supplied in kit form. They are available in a range of veneers, including oak, walnut, mahogany, and white.
The doors can be installed to open towards or away from you, and to the left or right. You just need to set the hinges accordingly during installation to suit your own requirements.
And please be aware that we may use narrower doors, whether panelled or glazed, for some sizes of these products. This can result in narrower panels or glass than in the images shown. This is because the timber sections that make up the door’s construction remain the same size across the full range of door sizes.
We can help:
With 30 years of experience in the industry, we know a good product when we see one.
The Easi-Frame and Easi-Slide range of room dividers is just that.
This new style of door & frame sets - available in a number of styles and sizes - offers a terrific option if you wish to separate an open plan area, but maintain the option to remove the partition when required.
With white and oak categories waiting to be explored, you’ll find a fantastic and flexible selection of room dividers, with an endless amount of combinations.
And every single door is sold with clear, toughened safety glass as standard
The Easi-Frame doors and side screens are all supplied fully glazed. The frames are shipped in kit form, with a 3m lintel, which suits all the available sizes shown.
Note: Handles and hinges are sold separately. Browse our full range of Door Furniture here.
You can choose any door size that you wish, so long as the combined width of the frame, doors, and side screens does not exceed 3m. What’s more, all actual door heights must be no more than 1981mm in order to fit the frame’s dimensions, while the depth of the frame is 135mm.
Read more about Easi-Frame or Easi-Slide Oak and Easi-Frame or Easi-Slide White installation details in those specific category's but we're here to offer advice at all times.
Measuring and Fitting:
First, we must advise that if you’re not an experienced DIY enthusiast, you may wish to seek the assistance of a seasoned joiner to help you measure and fit your new room divider.
And please note: The DIY advice provided on our website is only a guideline for the installation of doors. We cannot accept liability for any mishap, injury or damage caused to you, your property or a third party while following this advice.
Our unrivalled experience in fitting internal door systems means we can advise on which doors in our product range can be cut, and by how much, in both height and width.
If you’d like more information on the entire measuring and fitting process, visit our Help Section.
When measuring your room divider, ignore the current door size and follow the advice below.
Width: Measure each door between the frame at the top, the middle and the bottom.
Select a door that fits the widest size. This is because the widest size can be adjusted by you to suit the narrow area of any part of the opening without compromising the stability or affecting the look of the door.
Height: Measure from the carpet/floor covering to the underside of the timber lintol.
Thickness: Now and only now do you measure the door to find out how thick it is at present. With interior doors you may have to compromise and fit a slightly thinner door. This does not normally present any problems.
Note: Do not assume all interior doors in your house are the same size or thickness - check them all.
Read More: How to Measure for an Interior Door