Free Delivery on Doors – All VAT Included
Secure Purchase – SSL & PCI Compliant
Home >

Bespoke Worcester Oak 3L Glazed Single Pocket Door - Prefinished

In Stock

25-30 Weeks

Solid Core

Self Assembly 3-4 hours

This product could be subject to further delay.

All pocket cassettes or pocket self assembly kits may be kerbside delivery only and not in to the home..... doors are delivered separately..

We deliver for free to most UK Mainland postcodes and in order to offer best value and safety we include the soft closer.

All doors can slide open left or right, you decide when installing them, delivery will be from two separate suppliers. Read more


Single Pocket Door (PFGOWOR-BES-PS1)





Please choose either 100mm or 125mm Frame Jamb Width. If choosing 125mm then you must rotate the bracket 90 degrees to increase the thickness of the metal pocket cassette to suit at point of installation.



Please choose the nearest available overall wall space dimensions shown in millimetres. You must be sure to allow 10mm clearance in height to allow the cassette to fit so please do not try and squeeze a cassette frame within what may be a tight opening. Orders are accepted but must comply with what is practical, we will advise of any issues before processing.



Choose either Flat Clear or Obscure glass.



Please confirm the thickness of the door.



1 pair recommended per one door system.

All flush handles are sold separately and can be purchased at an additional cost.



This product is a bespoke item and cannot be cancelled after placing your order and by ticking this box, you confirm you are happy to proceed with the order.

Add Options
Choose productChoose options Choose requiredChoose optionsAdd To Basket Adding... Added To Basket Error

Add Options

Failed to load, please try again

Flush Pull Handle Pack (optional)

A range of flush pull handles perfect to match your sliding, folding or pocket doors.

Failed to load, please try again

+ £0.00

A router will be required for door(s) installation.

Please click here to find our manufacturers care and decoration advice for this door.

System operation viewed from above:

Our all new Bespoke Interior Single Pocket Door Systems have free delivery as standard, these pocket doors come with full fitting instructions and the door system allows you to slide the door straight in to a cavity in a preformed wall aperture, the system incorporates a galvanised steel cassette section and a track set with all fittings, soft close is also included. The door may be supplied with full decoration but no decor is included to the cassette system parts or its frame, check each door as you browse for the exact details.

See our "Dimensions PDF" for all sizes but use as a guide only.

Email to receive a quote for any special sizes.

The idea is to build the pocket to the same thickness as the studwork - 100mm (4") - which is one the standard studwork sizes generally in use, so that you can directly continue the standard 12.5mm plasterboard over the pocket providing the finished wall thickness of 125mm (5").

Further layers of plasterboard can be added to increase the overall wall thickness, but other joinery work may be required. The inner door cavity (where the door slides in to the cassette pocket) is therefore 79mm

Size limitations apply for the following items -Soft Close and Self Close - please refer to the individual accessory description.

The Easy stop AB twin dual soft closer/opener is included, all other accessories for pocket doors including flush door handles can be purchased separately.

Please Note: If the Self Closing Kit is purchased, we will not include the Easy stop AB twin dual soft closer/opener as the two are not compatible and cannot work together.

Doors will require a routered channel to be created in the bottom of each door to accommodate the supplied track guides.

The pocket door frame must be concealed with your own wall and architraves when installing.

Suggested Minimum Skill Level Advanced DIY & Specialist Joinery Tools Required.
Dimensions 40mm thick door and a frame section of 125mm external dimensions 79mm internal cassette cavity.
Notes The sizes we require are for the overall door and pocket set (wall space) which includes the metal pocket frame and Easy stop AB twin dual soft closer/opener but does not include any handles architrave or plasterboard, all doors require a groove to be cut in the bottom for the track guide to fit.
Important All pocket door items are supplied in kit form, any glass is pre-installed in the door.
Normal Availability for our Delivery Service See delivery icon on top of the product page.
Adjustment Doors will require a routered channel to be created in the bottom of the door to accommodate the track guide. All jamb kits supplied to suit all pocket doors sizes and will therefore need cutting to height and width on site.
Assembly Self Assembly may take 3-4 hours
Construction See core icon on top of the product page.
Price The price quoted is for the door(s), pocket system frame, all track fittings and soft closer, but no handles, any glass shown is pre-installed in the doors.

Product Optional

Flush Pull Handle Pack

Total Price


Choose productChoose options Choose requiredChoose optionsAdd To Basket Adding... Added To Basket Error
Loading Products