All doors can slide open left or right, you decide when installing them, delivery will be from two separate suppliers.
Our all new Interior Single Pocket Door System have a free delivery as standard, these pocket doors come with full fitting instructions and the door system allows you to slide the door straight in to a cavity in a preformed wall aperture, the system incorporates a galvanised steel cassette section and a track set with all fittings and the door may be supplied with full decoration but no decor is included to the cassette system parts or its frame, check each door as you browse for the exact details.
See our "Image Table" for all sizes but as a guide, all "Imperial" sized door systems require a structural opening of 2080mm high and widths of either 1466mm, 1592mm or 1818mm to suit actual door sizes of 1981x686mm, 1981x762mm or 1981x838mm respectively and these doors are 35mm thick.
There may also be the option of using "Metric Sized" doors when available for these systems but these "metric doors" require a structural opening of 2140mm high and widths of either 1310mm, 1510mm, 1710mm or 1910mm to suit actual door sizes of 2040x626mm, 2040x726mm, 2040x826mm or 2040x926mm, these particular doors are 40mm thick.
The frame breadth for the finished wall within the wall cavity for all door thicknesses is set at 125mm and the inner section size is 70mm, please check all of these sizes prior to forming any stud or similar wall
Other items such as damper units to close the door slowly, simultaneous openers for pocket door pairs and flush door pulls can all be purchased separately, doors will require a routered channel to be cretaed in the bottom of the door to accommodate the track guide.
The pocket door frame has to be concealed with your own wall and architraves when installing.
Viewed from above: