Exterior Hardwood Door Frames for Single Doors - Standard Sizes - Colour Options
Note: Our external frames are pre-assembled and supplied premium primed and a 750ml top top coat finish is included for the full frame to be prefinished on-site.
Please use our sample request product should you want to be sure of the colours.
We deliver for free to most UK Mainland postcodes!
All of these frames may require additional joinery work to suit the exact door width or height, in the case of the latter it should be noted that the frame with code DFC36 suits a 915mm wide door but there are two door heights with this width, the shorter door requires the frame legs to be shaped / cut.
Variant
2062x844mm To Suit a Door 762mm Wide (DFC30-PAINT)
£413.61
2062x920mm To Suit a Door 838mm Wide (DFC33-PAINT)
£413.61
2094x895mm To Suit a Door 813mm Wide (DFC32-PAINT)
£413.61
2160x945mm To Suit a Door 865mm Wide (DFC34-PAINT)
£424.03
2220x994mm To Suit a Door 915mm Wide (DFC36-PAINT)
£428.15
Add Options
These frames are sold without decoration and in set sizes to suit standard size doors and the cross sections are representative but some dimensions may vary without impacting on the fitting procedure, cill adapters (smallest section) are for opening the door outwards.
These frames offer great value but very few options for adjusting, ask us for details if you are unsure, if you require odd size frames please refer to our range of frames that are made to order, the actual dimensions will vary from those shown in the diagrams (see the Product specs notes for actual dimensions) but are comparable with traditional frame sections.
There is no glass requirement with these frames but there may be for the door you have chosen.
The frame is supplied in matt premium primed and ready for the final coat of paint. One extra can of top coat with 50% gloss is included, which provides a slightly higher shine. The full door must be prefinished on-site. Any cutouts or adjusted areas such as edges, letter plates etc., need to be properly sealed. Failure to treat bare timber may lead to excessive changes in moisture content which can cause shrinking, swelling, splitting or distortion.
| Colour/Grain | The frame is supplied premium primed and ready for final coat of paint. Please use the 750ml top coat included in your order and paint the door in full, please take special care to finish any cutouts or modified areas to prevent damage to the timber. Any cutouts or adjusted areas need to be fully sealed, including all the door edges |
| Normal availability for our delivery service | See delivery icon on top of the product page. |
| Overall frame sizes | Add 83mm to the height and 90mm to the width of your chosen door size to give you the overall frame sizes. |
| Frame breadth, from inside to outside | 68mm |
| Draught proofing | The draught seals to the frame legs and lintol is included in all except the 865mm and 1067mm frame sizes. |
| Door | Not included but available to order. |
| Weather bar | The weather bar (draught excluder) below the door and between the cill is not included but is available to order. |
| Timber cill | The cill below the door is approximately 38mm thick and 130mm broad from inside to outside. |
| Size | All sizes listed are the overall frame dimensions, it is possible for you to alter these within reason on site. |
| Note | These frame items are supplied in kit form, not assembled. |
| Guarantee | 12 months. |
| Suggested Minimum Skill Level | Medium DIY & Some Joinery Tools Required |
| Final coat of paint | Prior to applying the final coating, please lightly sand the door surface and eliminate any imperfections. |