Popular timber types - DIY tip 34
The range of timber available is endless. When trying to decide on the correct type of timber for your product/project try and think through what colour of finish you require....
The range of timber available is endless. When trying to decide on the correct type of timber for your product/project try and think through what colour of finish you require....
External Door - Frame Sets We carry out lots of work supplying "Door Sets" to customers specifications. The image shown below in this Blog is one such "Door Set" for...
Some planning and fire authorities require Intumescent fire and smoke seals to be fitted to the top and sides of the door. They may also want door stops to...
Internal Multifold Doors Double Doors as room dividers, for examples of some see external double and folding doors, If ever you are going to fall out with your partner it...
There are approximately 48 or more different species of hardwood grown in the United States of America, there are also approximately 25 or more Softwood species also grown. A total...
Advice on fitting a weather bar varies depending on the type of bar or drip chosen, so make sure you carefully read any manufacturer's instructions and/or directions. Start by measuring...
Ok, so now that you have some quality doors from www.directdoors.com we can begin. ALWAYS CHECK THE DOOR TO DECIDE IF IT HAS A HINGE EDGE AND A LOCK EDGE....
Accurate measuring and cutting is required when planning the fitting of a new door. The sizes you need to take are those for the overall width, not just the existing...
FIRSTLY, ALWAYS GO BY THE OLD SAYING "MEASURE TWICE, CUT ONCE!" Some helpful hints: Exterior timber doors which are being fitted in an existing frame need to be measured top,...
The measuring of interior doors is very straight forward. Have a writing pad to hand if measuring several doors and try and measure each of the doors room by...
There has been lots of discussion over the years about the pros and cons of what is the best type of joint for making doors. To clarify, the traditional method...