Minimalist Wardrobe Two Sliding Doors and Frame Kit

Configuration

3 Door

Door Quantity

3

Finish

Stainless Steel

Included Items

• 3x Door
• 1x Track & Track Fixing (excluding wall fixing)
• 3x Soft Closer
• 1x Frame (frame items are supplied in kit form without fixings, not assembled)
• 1x Front Lintol Plate

Architraves & Handles are not included.

Technical Specs

Configurations & Advice:

• Aluminium track guides supplied to suit each configuration.
• Door / Frame Finishes: Prefinished oak doors have unfinished oak frame materials, Unfinished Oak doors have unfinished oak frame materials, Prefinished walnut, white primed, black primed and black prefinished doors have white primed frame materials.
• Any mention of pre-finishing is to the door, the frame is supplied unfinished.
• All fittings such as track, track guides, guide channel, soft close anti-slam components, door track stops as well as the MDF frame components are all supplied - the MDF frame is pre-machined in the top frame rail and bottom threshold for the aluminium guide channels.
• Sizes have allowed for a 20mm door overlap.
• No interior furniture, shelving etc is included, neither are the wall, frame screws, fixings or your choice of handles.
• All Doors can open left or right but please refer to the diagrams and PDF for more clarity as there are restrictions due to soft close/anti slam fittings. You simply decide when you install them.
• Frame linings are 108mm or 133mm broad and 30mm thick and once again have an MDF solid core construction, the space between the top of the door and the underside of the track is a mere 6mm.
• All wardrobe doors can be trimmed but remember you will also need to cut the frame to suit the reduced doors, this will not be difficult, no handles supplied, please buy the handle you require separately.

Note: All these items are supplied in kit form, not assembled. Please note all Thruframe door products are cut to size upon receipt of order and cannot be cancelled afterwards, they are classed as a bespoke item created and manufactured by DirectDoors.com.

Any multiple door product, EG; door pairs, sliding double doors, folding doors or double pocket doors are individual doors put together as a product visual, please note we cannot guarantee that the veneers and colour will be an exact match but every care will be taken to provide you with the closest match possible.

Additional Information

Adjustment: Doors will require a routered channel to be created in the bottom of the door to accommodate the track guide.

Dimensions: Please note that any internal dimensions for panels, lining or glass may vary depending on the door width you require.

Assembly Tip:We all know veneers can vary in colour and grain. As soon as you're ready to begin we suggest standing your doors against a wall - look at the colour/grain and turn any or all doors 180 degrees to get the best match so that your completed installation is as good as it can be. Grain variation is natural - should you require "book marked" grain you would require the doors to be manufactured. Small variations in design features is not uncommon.