Stainless Steel Double Sirius Sliding Tubular Track for Wooden Doors - Top Mounted
All these items are supplied in kit form, not assembled. Please note all Thruframe door products are cut to size upon receipt and cannot be cancelled afterwards, they are classed as a bespoke item created and manufactured by DirectDoors.com.
The price shown is for the track only, the track only, the doors are not included.
We deliver for free to most UK Mainland postcodes, please note you may receive deliveries from 2 or more suppliers. Read more
Variant
To suit 686mm Doors - For Openings 1970mm High x 1352mm Wide (BDH-A15S-1500-SSS-686-2)
£418.73
To suit 762mm Doors - For Openings 1970mm High x 1504mm Wide (BDH-A15S-1830-SSS-762-2)
£435.64
To suit 838mm Doors - For Openings 1970mm High x 1656mm Wide (BDH-A15S-1830-SSS-838-2)
£435.64
Add Options
Flush Pull Handle Pack (optional)
A range of flush pull handles perfect to match your sliding, folding or pocket doors.
A router will be required for door(s) installation.
Product Advice:
- We will always endeavour to supply the best size track available relative to the door size, 2x1500mm tracks are supplied for 686mm doors, 2x 1830mm tracks for 762 doors and 2x 1830mm tracks for 838 doors.
- Opening sizes; the best opening size to aim for is 10mm less in height and 20mm in width than your chosen door size so the door "covers" the full opening and more, we have listed these in the door size options but you can choose to fit them to a smaller opening width/height.
- The type of architrave used or existing can impact on visible clearances.
- The prices shown include the door and track, all prices are inclusive of vat and delivery is free to most UK Mainland postcodes, delivery may be from 2 suppliers.
- A high-quality top mounted stainless steel sliding track system, the top-mounted track is screwed directly into the top of the door which gives the whole system a very sleek look.
- There is an approx maximum of 2130mm floor to ceiling height requirement for all variations (if using a 1981mm high door) which includes some tolerances for discrepancies to wall and floor levels.
- Doors will require a groove to be routered in the bottom of it to suit the floor guide, no bottom track is required in order to allow for a clear threshold so there is no trip hazard encountered with this track.
- Be very careful when setting any handle position and the track "stop" to prevent hand injuries.
- See our full range of handles and fittings here.
Assembly Tip: We all know veneers can vary in colour and grain. As soon as you're ready to begin we suggest standing your doors against a wall - look at the colour/grain and turn any or all doors 180 degrees to get the best match so that your completed installation is as good as it can be. Grain variation is natural - should you require "book marked" grain you would require the doors to be manufactured. Small variations in design features is not uncommon.
| Price | Includes the track, joint bracket for double doors and soft close. |
| Supplier Delivery Timescale | See the delivery icon at the top of the product page. |
| Guarantee | 12 months |
| Note | The style of track stops may vary depending on the size chosen. |
| Important | All these items are supplied in kit form, not assembled. Please note all Thruframe door products are cut to size upon receipt and cannot be cancelled afterwards, they are classed as a bespoke item created and manufactured by DirectDoors.com. |
| Suggested Minimum Skill Level | Advanced DIY & Specialist Joinery Tools Required. |
| Adjustment | Doors (not included) fitted with this track will require a routered channel to be created in the bottom of the door to accommodate the track guide. |