|Most Oak Doors delivered; 48 - 72 Hours anywhere on the UK mainland, Islands and exports by arrangement.
If you are looking for top quality internal oak doors at prices that won’t break the bank you have come to the right place, Internal Oak Doors with Glass, Internal Oak doors with Panels, Internal Oak Flush Doors or Oak Doors in Unusual Metric Sizes, we do them!
This internal oak doors range provides stylish options that will match and accentuate the décor in your home, in addition to this, delivery is free to anywhere within the mainland UK!
Oak Door Sizes;
Lots of these interior oak doors are available in these sizes, 1981x457mm, 1981x533mm, 1981x686mm, 1981, 762mm, 1981x838mm and 2032x813mm, the oak doors in unusual metric sizes are in sizes as follows, 2040x526mm, 2040x626mm, 2040x726mm, 2040x826mm and 2040x926mm, all the doors that are 2040mm high are 40mm thick.
All internal oak panel doors or internal oak doors with glass are veneered on a solid core of either laminated timber or a composite material, this allows us to better use the world’s timber resources responsibly and wherever possible we will supply FSC registered sustainable timber products, the oak veneer is of the best quality and to a thickness that complies with industry standards, these veneers are matched within a door but obviously each door has its own distinctive grain to give a beautiful contrast when installed in any quantity with your home.
Adjusting Oak Doors to Size
The internal oak doors and external oak doors are all fitted with solid oak edges to allow you some adjustment for onsite fitting to your existing door openings, our opinion is that you can safely adjust the height of each door by 50mm, try and take a cut from the top and a larger cut from the bottom but always adjust the width equally and within the tolerances permitted on each individual door.
Fitting Oak Interior Doors;
Oak internal doors are able to be fitted with two hinges as you would with virtually all internal doors but we tend to suggest three hinges are used as the internal oak doors weigh more than say a pine door for example.
Be aware that oak veneered doors, solid oak doors or oak front doors can be very hard to fix screws in to, please try and use a small pilot hole and or add a little bit of soap to the screw head to make the screw go in to the timber a bit easier, it really does work.
Decoration of Oak Doors;
The decoration of solid oak doors or veneered oak doors is when the grain is seen to come alive, the best finish in our opinion is a satin finish varnish or a clear wax, if using wax you should not use it on the inside of wet rooms or bathrooms, use a clear varnish and remember to seal the top of all doors properly to prevent moisture penetration.
Please be aware we do not recommend using anything but very fine sandpaper or wire wool for very light hand sanding only, try and fold the sandpaper over and use the thicker folded edge in the direction of the grain, the folded edge is less likely to get under any heavier parts of the veneer and cause a splinter.
These internal oak doors are available as Flush, Panel or with Glass, there is also a very large amount of matching internal oak doors within the fire doors sections that match, please remember the fire doors are 45mm thick and must have three hinges fitted, the hinges have to comply with fire ratings.
This link shows our full range of great oak doors available through our site.
|Paint N Peel Instructions:
||Easy Print - Door sizes:
Not all doors have the Paint N Peel facility, Call 01968 671681 for assistance.