JB Kind Fire Doors - Internal JB Kind Doors

The full range of JB Kind Fire Doors...........lots of choice from this progressive company.

Doors are shown here in Flush, Panel, Glazed, Oak, Walnut, Ash, Beech, Plywood, Grey and White to name but a few.

Our Internal JB Kind fire doors are available at very reasonable prices. DirectDoors.com are leading stockists of JBKind fire doors. Shop Now to see the Full Range.

Whatever you want, special sizes or bespoke veneers for those special commercial projects.....we can do it......just remember that bespoke items are more expensive and can take 12 weeks to source.


All our fire doors are certified and our door suppliers are able to provide proof of performance showing the door successfully completed a rigorous fire test to the BS 476 Part 22 standard or the European equivalent BS EN 1634.

All Building regulations specify the requirements for fire resisting doors to protect occupants for a minimum time which is expressed in minutes, either 20, 30, 60 minutes etc, most of the time tradesmen will use the term FD30 and FD60 which relates directly to 30 minute and 60 minute ratings.

The doors are tested as a complete assembly including door frames, intumescent seals and essential ironmongery and can only be guaranteed if the tested design is replicated with the correct compatible components,  Please ask for a copy of the test evidence when fitting these doors.

FD30 (30 minutes)  are usually 45mm thick, as opposed to the standard door thickness of 35 mm, there is absolutely no point if fitting a fire rated frame if you then fit a standard non-fire door.

FD60 (60 minutes) most commonly used in commercial settings are normally 54mm thick. Specially constructed fire doors can have a rating of 4 hours or more, this is very much dependent on fitting ALL of the correct materials.

Showing 151 items
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 9
  8. Next