Office Doors with Special Apertures;
Regardless of delivery timescales these products go in to immediate production therefore all of these doors are deemed "SPECIAL ORDER" and any orders cancelled by the customer cannot be refunded.
Apertures and doors were individually fire rated and tested; however as a unit they were not fire assessed and may not comply with fire standard requirements.
All our office doors with special round and square metal apertures (SlimPro and LoPro) are certified in the following manner, our door suppliers are able to provide proof of performance showing the individual door successfully completed a rigorous fire test to the BS 476 Part 22 standard or the European equivalent BS EN 1634, the fire rated aperture has then been separately tested and certified, the certification relates to a door and then the aperture individually and a dialogue should be undertaken with your planning and / or fire officer as to the requirements for compliance.
All doors are supplied without intumescent fire and smoke seals, any doors shown as a pair are supplied as individual doors which will be as close a match as possible for veneers and colours.
We use several different styles of circular vision frames or square vision frames to form glazed openings (apertures) in this range, portholes for doors, square glazed openings, oblong glazed openings...............and specials!
Slimport Vision Frames;
The ZEROplus top selling Slimport is a round metal porthole window (or circular vision frame to give its correct name) for installation in doors, walls and partitions.
Slimport metal porthole windows are available to suit four different door cut-outs: 250mm, 350mm, 450mm and 550mm. With countersunk holes in the bevel return on one side only, and 25mm screws that pass through the door cut-out and fix internally, the Slimport looks good aesthetically, and is totally free from visible fixings on the corridor side.
Slimport porthole window frames are available to suit the four most popular door thicknesses of 40mm, 44mm, 50mm and 54mm with a tolerance of ±2mm. The glazing pocket is 10mm wide (±2mm in relation to the door thickness) to accommodate 6mm-thick glass and appropriate glazing tape. If you have other door and glass thickness combinations please contact us for more information.