Exterior Door Frame, Type 1 for Single Doors, Made to Order, with or without threshold or cill.

In stock
Buy now
  1. We deliver for a small charge, ANYWHERE MAINLAND UK!

The easiest way to order,

1. Choose the best door size from our door selection.

2. Give us a note of your intended door size in the notes section of this order.

3. In the section below give us your overall frame width from left to right and then give us the height from floor to lintol as required.

We can alter the frame height or adjust the door within reason, we will let you know if your sizes do not work.

Exterior Door Frame, made to size, we have allowed for the dimensions (including clearances) of a standard weather bar, if you require us to supply one of these please add the "Exitex Weatherten" bar in the fittings section, the draught proofing to the top and sides is included in the price, any doubts? put your thoughts in the notes section of your order.

Thresholds Please tell us if there is a requirement for a timber threshold / cill between the door and the floor and what the preferred thickness is, we have shown two samples but be aware that dimensions & frame heights will vary if a threshold / cill is chosen.
Frame Breadth, from inside to outside 95mm
Glass There is no glass requirement with this frame but there may be for the door you have chosen.
Normal Availability for our Delivery Service Made to order 14-21 days
Guarantee 36 months
Notes This frame is supplied ready assembled where practical or in kit form if not, the frame legs will be longer than required to allow for site cutting unless the frame has a timber threshold or timber cill.
Special Note Please do not be confused by the terminology relating to timber thresholds or timber cills allied to the Weatherten bar, put your thoughts in the notes section of your order if you have any doubts or concerns.
Overall frame sizes The overall frame sizes or individual dimensions can be altered but may have cost implications, use the notes section of your order form to advise us of any special requirements.

1Timber Type (Required)

Unit price Quantity
Made in Far Eastern Mahogany (FRAT195BC) RRP: £371.36 £330.10
Made in Southern Yellow Pine (FRAT195SY) RRP: £371.36 £330.10
Made In Traditional Oak (FRAT195AO) RRP: £428.64 £381.01
+  £0.00

2Overall Frame Dimensions (Required)

Between 828mm and 1011mm

Between 2042mm and 2256mm

Note:

Please enter the overall required frame dimensions in millimetres. As a general thumb-rule your overall frame size is USUALLY your door height plus 101mm and your door width plus 66mm.

(101mm = 30mm frame head + 23mm draught bar clearance + 45mm cill + 3mm clearance)

(66mm = 30mm frame legs + 3mm clearance to either side of the door)

If you need a door that's bigger or smaller than these sizes, enter your required dimensions, choose the rest of your door preferences, and you may be able to get a quotation instead of placing an order.

3Cill below the door (Required)

No cill below the door selected yet.

+  £0.00
Note:

The cill sizes listed are the sizes of the cill where it projects past the outer face of the frame.

4Handing (Required)

Note:

Handing is the term used to describe the indication of whether the door opens inwards or outwards. It is important to keep this in mind when fitting both internal doors and external doors. Handing is ALWAYS considered from the OUTSIDE of the room or building that the door is for.

Total price

The total price for your selection is:

£0.00(inc VAT)