Most doors delivered within 48-72 hours, Islands and exports by arrangement.
Fire Door Matched Pair Disclaimer:
All our fire doors including glazed fire doors are certified as single doors and our door suppliers are able to provide proof of performance showing the individual door successfully completed a rigorous fire test to the BS 476 Part 22 standard or the European equivalent BS EN 1634, the fire door matched pairs are shown to allow you to visualise how they would look and are factory chosen for matching the veneers / colour as closely as possible, the certification relates to a single door and a dialogue should be undertaken with your planning and / or fire officer as to the requirements for compliance but most importantly fire door matching pairs cannot be rebated.
These double panel fire doors are the best presented on the market.
All double fire doors must be fitted with the correct level of fire & smoke seals as well as the correct frame (when a frame is required by planning etc) and hinges, none of the doors are rebated where they meet but could be shown with a rebate for display purposes only, see our interior fire doors section for the full spec details, sizes are "tight" without any fitting clearances allowed, many of the fire doors are deemed "SPECIAL ORDER", this means that any orders that are subsequently cancelled by the customer are NON-REFUNDABLE.
For the full range of fire doors we have on offer click here.
Detailed Construction of Fire Doors and Fire door Frames:
FD30 (30 minutes) glass fire doors, panelled fire doors or flush fire doors are usually 44 - 45mm thick, as opposed to the standard door thickness of 35 mm, there is absolutely no point if fitting fire door frames if you then fit a standard non fire door.
FD60 (60 minute) fire doors are not cheap fire doors due to their lack of choice and the required construction methods, they are most commonly used in commercial settings and are normally 54mm thick. Specially constructed fire doors can have a rating of 4 hours or more, this is very much dependent on fitting ALL of the correct materials, our suggestion with such a heavy fire doo is to fit 4 hinges with two of the hinges being fitted nearer each other at the top of edge of the door.
|Paint N Peel Instructions:||Easy Print - Door sizes:||Diy Video Section|
Not all doors have the Paint N Peel facility, door sizes within the above pdf are a guide only (mainly for single doors) and each product should be checked for individual sizes as fire doors are in the main 45mm thick but some are even thicker when they are 1 hour (60 minute fire rated) and therefore care should be taken, call 01968 671681 for clarity or assistance.