All doors slide open left and right, delivery will be from at least two separate suppliers.
Our all new Interior Double Pocket Door System have a free delivery as standard, these pocket doors come with full fitting instructions and the door system allows you to slide the doors straight in to a cavity in a preformed wall aperture, the system incorporates a galvanised steel cassette section and a track set with all fittings and the door may be supplied with full decoration but no decor is included to the cassette system parts or its frame, check each door as you browse for the exact details.
See our "Dimensions PDF" for all sizes but use as a guide only.
The Eclisse pockets are available in two standard widths for a finished wall thickness of either 100mm or 125mm.
The idea is to build the pocket to the same thickness as the studwork - 75mm (3") or 100mm (4") - which are the two standard studwork sizes generally in use, so that you can directly continue the standard 12.5mm plasterboard over the pocket providing the finished wall thickness of either 100mm (4") or 125mm (5").
Further layers of plasterboard can be added to increase the overall wall thickness. The inner door cavity (where the door slides in to the cassette pocket) is therefore 58mm or 83mm.
Other items such as damper units to close the door slowly, simultaneous openers for pocket door pairs and flush door pulls can all be purchased separately, doors will require a routered channel to be created in the bottom of the door to accommodate the track guide.
The twin pocket door frame has to be concealed with your own wall and architraves when installing.
Viewed from above: