DXF Internal or External Plywood 1/2 Hour Fire Rated Door Blank

Some planning and fire authorities require Intumescent fire and smoke seals to be fitted to the top and sides of the DXF Plywood Fire Door Blank. They may also want door stops to be 25mm thick on your door frame and some form of door closer will be required also. Please remember that the hinges have to be up to a suitable fire standard.

This door blank is available in the size 2135mm high x 915mm wide as shown below.

All our fire doors are certified as single doors and our door suppliers are able to provide proof of performance showing the individual door successfully completed a rigorous fire test to the current standards, the certification relates to a single door and a dialogue should be undertaken with your planning and / or fire officer as to the requirements for compliance but most importantly fire door matching pairs cannot be rebated.

See a full range of handles here and fire door fittings here.

All single fire doors must be fitted with the correct level of fire & smoke seals as well as the correct frame and hinges, sizes are overall tight and without any clearance gaps allowed for fitting.